Set the volume on all your devices to the same level

Here you are welcome to share your Push2Run cards

PLEASE NOTE:
If you are downloading a Push2Run card from here or anywhere else, please inspect it carefully before running it or any software associated with it. If you don't do this you may end up with seriously unwanted results.

When sharing a card, please leave any special instructions that are required for its use. For example, if additional software is needed to enable the card, you should leave a link to the program's official webpage.
Post Reply
RobLatour
Site Admin
Posts: 1003
Joined: Mon Feb 19, 2018 11:43 am

Set the volume on all your devices to the same level

Post by RobLatour »

with the attached Push2Run card and the Cast program found here www.rlatour.com/cast

you can change the volume on all your google devices, and your PC, all at once with one voice command ...

OK Google, tell my computer to make the volume 25
Attachments
Change_volume.p2r
(523 Bytes) Downloaded 516 times
Top
dottedandlines
Posts: 1
Joined: Wed Nov 20, 2019 7:46 am

Re: Set the volume on all your devices to the same level

Post by dottedandlines »

HI Rob
If I say "tell my computer to set the volume to 15 %" it doesn't work, I think the percentage screws it up. Is there a way to formulate this to work.
Top
RobLatour
Site Admin
Posts: 1003
Joined: Mon Feb 19, 2018 11:43 am

Re: Set the volume on all your devices to the same level

Post by RobLatour »

Thanks for reporting this. Fixing it was a very small change - now done. If you like, you can go to the cast website ( www.rlatour.com/cast ) re-download the program (now at version 1.5) and give it a try. It should work just fine.

of note - you may have to refresh your browser (usually F5) to see the change to the website.
Top
Post Reply

Return to “Shared Push2Run cards”