push2run not recieving command

[RobLatour]

It looks like the Dropbox part of your IFTTT applet may not be setup correctly.

If you look at step 14 here https://www.push2run.com/setup_dropbox.html you will see the fields:
TextField
and
CreatedAt
are highlighted, which means they are IFTTT ingredients.

However, in your log below they are coming across as just the words 'TextField' and 'CreatedAt'.

To fix this, I suspect all you need to do is just edit your IFTTT applet and either use the 'add ingredients' button to add those two fields in place of what is there now, or use the following:

Push2Run_ONE<br>
{{TextField}}<br>
{{CreatedAt}}<br>

Hope that helps

[Dreammaker]

Thank you for the response RobLaTour.
I did try those recommendations this evening and it still didn't correct the issue. So I tried using and set up pushbullet to see it that worked and, that didn't work either. I also checked all my firewall settings to make sure all three were not being blocked and they appear to be ok.
Any other ideas for the original dropbox or Pushbullet? Are there any windows features that might be preventing it from working? I tend to keep the computer kind of locked down, security wise, as far as what windows is allowed to do.

2020-07-01 22:35:34.239 - Master switch was turned off

2020-07-01 22:35:38.442 - Master switch was turned on

2020-07-02 01:01:31.164 - Pushbullet websocket error
2020-07-02 01:01:31.176 - Pushbullet websocket error
2020-07-02 01:01:31.195 - Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
2020-07-02 01:01:31.223 - Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
2020-07-02 01:01:31.251 - Pushbullet websocket closed
2020-07-02 01:01:31.274 - Pushbullet websocket closed


2020-07-02 01:01:31.383 - Attempting to reconnect to Pushbullet
2020-07-02 01:01:39.253 - Connection with Pushbullet established

[Dreammaker]

Here are a few screen captures

1111111.PNG (17.95 KiB) Viewed 1244 times

123456.PNG (26.75 KiB) Viewed 1244 times

02220.PNG (21.39 KiB) Viewed 1244 times

[RobLatour]

on your Push2Run card please change the

open value to
calc
and the start directory value to
C:\Windows\System32\

Also in your Push2Run - Options - Dropbox window, please ensure 'enable Dropbox' is checked
and
the Dropbox path is
C:\Users\yourwindowsaccount\Dropbox\Apps\Push2Run\
the Dropbox filename is
Command.txt
the device name is
Push2Run_One

For Pushbullet, I'm not sure, but could you re-enter your API token in the Push2Run - Options and try again today