pushbullet command is received, but push2run not picking it up.

clambert122 · Post by **clambert122** » Tue May 05, 2020 3:28 pm

Howdy. Hope this time finds you all well and safe.

So, I have google assistant and PushBullet linked through IFTTT, and I know thats working as my power on automation works just fine. ( using automation magic to send a WOL call )

I have the Pushbullet app installed on my PC, and I can see the shutdown command issued there as well.

I have a freshly created pushbullet count, I have a freshly installed Push 2 Run.

It shows that it is indeed connected to pushbullet is good in lower corner ( I reset the key several times just to make sure )

the message that Pushbullet issues is

shutdown_rts

when I say, okay google, shutdown pc, I can see that command is sent to pushbullet via the logs.

I have a shutdown command setup in push2run

descrption: shutdown_rts
listen for : shutdown_rts
shutdown

open: shutdown
parameters: /s /t 10 /c "requested by home automation"

The shutdown routine works fine when I execute it from within push2run

The trigger is right, the listen for is right, as thats what google assistant triggers via ittt, provides the right dialog, and then issues the push from pushbullet, which again, i see in the pushbullet logs.

What am I missing to make sure push2run picks this up? I am at a loss, and I am pretty savvy at this stuff.

push2run simply isnt picking up the trigger, and I cant see why.

Thank you very much for any help or insight you can provide.

Stay safe.

clambert122 · Post by **clambert122** » Tue May 05, 2020 3:51 pm

2020-05-05 14:02:22.961 - Push2Run version 3.0.3.0 started

2020-05-05 14:02:22.975 - Windows UAC notify feature is on

2020-05-05 14:02:22.978 - Normal privileges are in effect

2020-05-05 14:02:23.503 - Current network adapter is Ethernet

2020-05-05 14:02:23.657 - Network status is up

2020-05-05 14:02:35.263 - Connection with Pushbullet not established

2020-05-05 14:02:36.287 - Attempting to reconnect to Pushbullet
2020-05-05 14:02:37.096 - Connection with Pushbullet established

2020-05-05 14:10:01.325 - Incoming Pushbullet push ...
2020-05-05 14:10:01.326 - <Title> shutdown_rts
2020-05-05 14:10:01.327 - <Body> shutdown_rts
2020-05-05 14:10:01.329 - Title did not match Push2Run's title filter - no further action will be taken

2020-05-05 14:41:09.273 - Incoming Pushbullet push ...
2020-05-05 14:41:09.274 - <Title> shutdown_rts
2020-05-05 14:41:09.274 - <Body> shutdown_rts
2020-05-05 14:41:09.275 - Title did not match Push2Run's title filter - no further action will be taken

but.. it does match.

Post by **RobLatour** » Tue May 05, 2020 4:01 pm

Following the instructions here: https://www.push2run.com/setup_pushbullet.html

The pushbullet title as shown in step 7 needs to match the pushbullet title as shown in step 18.

Based on the info you provided, I suspect that is not the case. Can you please recheck?

clambert122 · Post by **clambert122** » Tue May 05, 2020 4:15 pm

thanks for the fast prompt reply. You nailed it.

Post by **RobLatour** » Tue May 05, 2020 4:28 pm

glad to have helped, enjoy the program.

A Viewer for Windows, Cast, NotifyOnDemand, Push2Run and SetVol

pushbullet command is received, but push2run not picking it up.

pushbullet command is received, but push2run not picking it up.

Re: pushbullet command is received, but push2run not picking it up.

Re: pushbullet command is received, but push2run not picking it up.

Re: pushbullet command is received, but push2run not picking it up.

Re: pushbullet command is received, but push2run not picking it up.